Base Drum Heater 0-120ºC
Base Drum Heater for metal drums up to 200 L, designed for direct bottom-up product heating as a standalone solution or in combination with a traditional Drum Heater.
900 W / 230 V output, 550 mm diameter and integrated Jumo heattherm thermostat with adjustable 0-120°C temperature range.
Ideal for water, oils, diesel, resins, petroleum jelly, waxes, fats, butter and adhesives, with 50 mm high-density rock wool insulation.
Description
Base Drum Heater 0-120°C
The Kuhlmann Electro-Heat Base Drum Heater 0-120°C 900W is designed to heat metal drums directly from underneath, providing a practical alternative or complementary solution to traditional drum heating jackets.
With a diameter of 550 mm, the heater is suitable for different sizes of metal drums up to the standard industrial 200 L drum. The drum is positioned directly on the heated base, allowing heat to transfer upwards through the bottom of the container and into the contents.
An integrated Jumo heattherm thermostat provides an adjustable temperature range from 0 to 120°C, allowing easy setting and maintenance of the required temperature.
The heating system uses a wire heating element incorporated into a glass-reinforced silicone heater mat. Beneath the heating element, 50 mm high-density rock wool insulation helps minimise downward heat loss and directs more thermal energy towards the drum.
With a power output of 900 W at 230 V, the heater is suitable for heating and maintaining the temperature of a broad range of industrial liquids and products where reduced viscosity can improve pumping, pouring or further processing.
For applications requiring faster heating, the base heater can be used simultaneously with a suitable Drum Heating Jacket. The base heater supplies heat from underneath while the jacket heats the drum around its circumference.
Key Benefits
- Direct bottom-up drum heating.
- Suitable for different sizes of metal drums up to 200 L.
- Integrated Jumo heattherm 0-120°C thermostat.
- 900 W / 230 V output.
- 50 mm high-density rock wool insulation.
- Simple installation with the drum positioned directly on the heater.
- Can be used as a standalone heating solution.
- Can be combined with a Drum Heating Jacket for faster heating.
Ideal for Heating
- Water
- Oils
- Diesel fuel
- Resins
- Petroleum jelly
- Waxes, e.g. lanolin
- Fats
- Butter, e.g. Ghee
- Glues and adhesives
Technical Specifications
- Power: 900 W.
- Supply voltage: 230 V.
- Heating element: wire element in a glass-reinforced silicone heater mat.
- Insulation: 50 mm high-density rock wool.
- Supply lead: 2 m power cable.
- Thermostat: Jumo heattherm 0-120°C.
- Weight: 15 kg.
- Dimensions: Ø550 x 105 mm.
- Suitable for metal drums up to 200 L.
- Can be combined with traditional Drum Heaters.
Specifications
| SKU | Drum | Dimensions | Thermostat | Voltage | Power |
| 11-9868 | Up to 200 L | Ø550 x 105 mm | Jumo heattherm 0-120°C | 230 V | 900 W |
IMPORTANT
The integrated thermostat has an adjustable range of 0-120°C. The actual maximum permissible operating temperature must always be determined by the product being heated, the metal drum and the conditions of the specific application.
This base heater is designed for metal drums. Applications in hazardous areas where potentially explosive atmospheres may occur require suitably certified ATEX heating equipment.
TIP
For a faster heating process, the Base Drum Heater can be used together with a suitable Drum Heating Jacket. The base heater transfers heat from underneath while the jacket heats the drum around its circumference.
Ask A Quote
Fill the form to get a quote or more information about the product.








