Powder Scale Remover for Inox
Acid detergent powder salt. Contains special deactivators for maximum protection of metals and index activity. It is used for Inox surfaces, boilers, heat exchangers, coffe makers, washing machines, cooling systems, pools etc. Recommended for all metals as well as a stainless steel, copper and copper alloys.
- Removes calcium carbonate deposits
- Contains an indicator to indicate exhaustion and when cleaning is complete
- May be used on stainless steel equipment
After cleaning, equipment should be thoroughly rinsed with water and then rinsed with a neutralising solution such as sodium carbonate solution, and then thoroughly rinsed with water again.. Do not leave equipment wet or damp after cleaning as “after rusting” may occur.
Treatment and Feeding Requirements
Proper treatment levels of Safe Acid Powder depend on many factors, such as quantity, composition and nature of deposits and conditions particular to a given installation. Typically the product would be applied at a solution concentration of between 5% and 10% of Safe Acid Powder. The product should be used in accordance with control procedures that GE Water & Process Technologies establishes for a specific application.
Equipment recommendations are available upon request.
Physical properties of Safe Acid Powder are shown on the Safety Data Sheet, a copy of which is available upon request.
Store Safe Acid Powder at moderate temperatures in a dry area and protect from moisture. Store away from alkaline chemicals.
A Safety Data Sheet containing detailed information about this product is available upon request.
Ask A Quote
Fill the form to get a quote or more information about the product.