Economical Double Controller for Conductivity and pH
Innovative and Economical Double Controller for Conductivity and pH. Compact in IP65 box for wall mounting. On request WEB CONTROL by Ethernet.
Available combination:
pH 0÷14,00 / CD 0÷20 mS/cm
Description
Economical Double Controller for Conductivity and pH
Innovative and Economical Double Controller for Conductivity and pH. It is suitable for small and large swimming pools, industrial water treatment plants, drinking water, cooling towers, hydroponics. Ready to operate and easy to install. Compact in IP65 box for wall mounting.
| This Economical Double Controller for Conductivity and pH gives both a valid, low cost measurement and requlation system for large or small industrial and ecological plants, and they can be used as 0/20mA or 4/20mA visualized transmitter for field applications.
2 free-standing relay outputs (one per parameter), pure contact [ON-OFF, PWM, WINDOW, ALARM] and 3rd proportional relay proporzionale (similar
Digital Display with high efficency leds with 2 lines of 16 digits per line, allows the conteporaneous visualization of parameters: chemical measure and temperature
On request is possible to have an output for local or WEB CONTROL by Ethernet connection.
|  |
Using the programming menu, it is possible to select the available measurement scale to ensure operating versatility with a single instrument.
Instrument Recognises the buffer solution (pH and Redox) and completes the calibration suspending the dosage (HOLD) and showing the electrode’s effciency in %.
Technical Data
| V-MS MultiParameter | |
| Available Combinations: PH / Conductivity (CD) |
0÷14.00 / 0÷20.000 μS/cm |
| Temperature | 0÷100 C με PT100 |
| Resolution | 1% FS |
| Calibration | 2 Auto/manual for Zero & Sensitive Software assisted |
| Temp. Compensation | Automatic or Manual from 0 to 100 C |
| Enviroment | -5 to 50 C max RM 95% |
| Relay 1 Contact Type Max resistance load Hysteresis Delay Start Delay End | ON/OFF , PWM, INTERVAL Free Voltage (Dry Contact) 8A 250V AC Yes Yes Yes |
| Relay 2 Contact Type Max resistance load Hysteresis Delay Start Delay End | ON/OFF , PWM, INTERVAL Free Voltage (Dry Contact) 8A 250V AC Yes Yes Yes |
| Relay 3 Contact Type | Proportional Pulse similar to meter signal |
| Analog Output | 0/4÷20 , 20÷4/0 mA (+/- 2%) κατ’ επιλογήν |
| OFA (Over Feed Alarm) or UFA (Under) | Alarm if the value exceeds a set point |
| pH/CD Security Time | Alarm if variation lower than +0.4pH / +50μS |
| Statistics | Yes |
| Screen | 2 Lines 16 Characters Backlit LCD |
| Keyboard | 4 buttons |
| Power Supply | 90-260 VAC 50/60 Hz |
| Power Consumption | 12 W |
| Protection | IP 65 |
| On request | Connector RJ45 and Ethernet cable to local or remote control via WEB |
| On request | USB port |
Specifications can change without notice
WEB CONTROL
First Screen
Measurements Screen
Graphics Screen
Relay 1 & 2 Screen
Relay 3 Screen (pulse)
Analogic Output mA Screen
Information
Suitable Probes
Connections
Dimensions
Ask A Quote
Fill the form to get a quote or more information about the product.
