Level control Unit for max 7 separate chemical containers with 5 m power cable. Indicative LED on the front panel representing each container separately. Alarm output for siren or buzzer. ...more information
Énjection valve PVC or PVDFwith ceramic ball and hastelloy spring suitable for all dosing pumps up to 60 l/h. Connection : 1/2" - 3/8". Pipe : 4x6, 4x7 and 8x12 Seals : FPM or EPDM. ...more information
Pre assembled suction lances with foot filter and level probe, made by PVC/PP. It is equipped with foot valve, clear PVC tube, and suction filter to protect the pump. It works perfectly with "Level Control Unit" and pumps with appropriate connection. ...more information
Multifuction valve, antisyphon, backpressure, priming, drain, safety, 5/10/18 bar. Protect pumping systems from over pressure damage caused by defective equipment or a blockage in the system line. Connections for 4x6 and 8x12 tubes. Seals: PTFE. ...more information
Flow sensor suitable to check the flow of the dosing liquid. Gives proper signal to the pump for stop/alarm. Connections for 4x6 and 8x12 tubes. Seals: FPM. ...more information
Back-pressure valve, suitable for on-line dosing. Prevent siphoning and stabilize dosage rates. Working pressure from 0.5 to 10 bar. Max flow rate: 500 l/h. Connections for 4x6 and 8x12 tubes. Body material: PVC or PVDF. ...more information
Back-pressure valve, suitable for on-line dosing. Prevent siphoning and stabilize dosage rates. Fixed working pressure from 1,5 bar. Max flow rate: 500 l/h. Connections for tube 4x6, out 3/8"-1/2"G. Body material: PVDF. ...more information
Back-pressure valve, suitable for on-line dosing. Prevent siphoning and stabilize dosage rates. Adjustable working pressure from 0,5-10 bar. Connections for tube 4x6, out 3/8"-1/2"G. Body material: PVDF. ...more information
Floating level probe with bipolar cable 2 mt with proper support for easy and quick intallation. Suitable to protect any dose pump from the dry working. ...more information
Pump head with automatic degassing valve, flow reduction, according to the quality of air in the liquid. Connections for 4x6 and 8x12 tubes. Seals: FPM . ...more information
The priming aid system can solve malfunctioning problems on metering pumps associated with low flow rate or aspiration from greater height than the capacity of the pump. Connections for 4x6 and 8x12 tubes. Seals: FPM. ...more information
Made with high quality plastics, resistant to all the chemicals normally used in agriculture, even in the most extreme weather conditions. Nozzle dimentions: 0.62 mm. With a back pressure of 4 bar the atomizer produces drops of about 90 microns ...more information
Special design storage tank with support for dosing pump installation. Suitable for dosage any chemical solution. Volume : 135 lt Dimensions : Ø 470mm x h 1010mm. ...more information
Énjection valve PVC or PVDFwith ceramic ball and hastelloy spring suitable for all dosing pumps up to 60 l/h. Connection : 1/2" - 3/8". Pipe : 4x6, 4x7 and 8x12 Seals : FPM or EPDM. ...more information